Publicación:
Analysis of Favourable Process Conditions for the 2 Manufacturing of Thin-Wall Pieces of Mild Steel 3 Obtained by Wire and Arc Additive Manufacturing 4 (WAAM)

Vista sencilla de ítem
dc.contributor.authorPrado Cerqueira, José Luis
dc.contributor.authorDiéguez, José Luis
dc.contributor.authorAragón, Ana María
dc.contributor.authorLorenzo Martín, Cinta
dc.contributor.authorYanguas Gil, Ángel
dc.contributor.authorRodríguez Prieto, Álvaro
dc.date.accessioned2024-05-20T11:39:02Z
dc.date.available2024-05-20T11:39:02Z
dc.date.issued2018
dc.description.abstractOne of the challenges in additive manufacturing (AM) of metallic materials is to obtain workpieces free of defects with excellent physical, mechanical, and metallurgical properties. In wire and arc additive manufacturing (WAAM) the influences of process conditions on thermal history, microstructure and resultant mechanical and surface properties of parts must be analyzed. In this work, 3D metallic parts of mild steel wire (American Welding Society-AWS ER70S-6) are built with a WAAM process by depositing layers of material on a substrate of a S235 JR steel sheet of 3 mm thickness under different process conditions, using as welding process the gas metal arc welding (GMAW) with cold metal transfer (CMT) technology, combined with a positioning system such as a computer numerical controlled (CNC) milling machine. Considering the hardness profiles, the estimated ultimate tensile strengths (UTS) derived from the hardness measurements and the microstructure findings, it can be concluded that the most favorable process conditions are the ones provided by CMT, with homogeneous hardness profiles, good mechanical strengths in accordance to conditions defined by standard, and without formation of a decohesionated external layer; CMT Continuous is the optimal option as the mechanical properties are better than single CMT.en
dc.description.versionversión original
dc.identifier.doihttp://doi.org/10.3390/ma11081449
dc.identifier.issn1996-1944
dc.identifier.urihttps://hdl.handle.net/20.500.14468/12365
dc.journal.issue8
dc.journal.titleMaterials
dc.journal.volume11
dc.language.isoen
dc.relation.centerE.T.S. de Ingenieros Industriales
dc.relation.departmentIngeniería de Construcción y Fabricación
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
dc.subject.keywordsadditive manufacturing
dc.subject.keywordsWAAM
dc.subject.keywordsGMAW
dc.subject.keywordscold metal transfer
dc.subject.keywordshardness;
dc.subject.keywordsmechanical properties
dc.subject.keywordsthermal input
dc.subject.keywordsmicrostructure
dc.titleAnalysis of Favourable Process Conditions for the 2 Manufacturing of Thin-Wall Pieces of Mild Steel 3 Obtained by Wire and Arc Additive Manufacturing 4 (WAAM)es
dc.typejournal articleen
dc.typeartículoes
dspace.entity.typePublication
relation.isAuthorOfPublicationebbef81e-9b79-4d38-ac0b-2069afa400b8
relation.isAuthorOfPublication.latestForDiscoveryebbef81e-9b79-4d38-ac0b-2069afa400b8
Archivos
Bloque original
Mostrando 1 - 1 de 1
Miniatura
Nombre:
Rodriguez_Prieto_Alvaro_Prado_Cerqueira_et_al.pdf
Tamaño:
1.98 MB
Formato:
Adobe Portable Document Format
Descargar
Colecciones
Artículos y papers