Publicación: Análisis estadístico de variabilidad del calor específico de escoria de cobre chilena para almacenamiento térmico de lecho empacado
Cargando...
Fecha
2024-10-22
Editor/a
Director/a
Tutor/a
Coordinador/a
Prologuista
Revisor/a
Ilustrador/a
Derechos de acceso
info:eu-repo/semantics/openAccess
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Nacional de Educación a Distancia (España), Universidad de Concepción - Chile. Departamento de Ingeniería Mecánica
Resumen
El presente trabajo entrega un análisis del comportamiento del calor específico (cp) de muestras de escoria de cobre chilena, considerando la variabilidad del cp en función de la temperatura y su impacto en el rendimiento de sistemas de almacenamiento térmico de lecho empacado (PBTES). Se desarrollaron modelos probabilísticos basados en los percentiles 5%, 50% y 95% de los datos de cp para capturar los casos más y menos probables. Los resultados muestran que el valor promedio de cp se encuentra ligeramente por encima de la mediana, indicando un sesgo positivo. Además, se observa que el modelo P5% muestra un avance rápido de la termoclina en el estanque, mientras que el modelo P95% presenta una propagación más lenta. La eficiencia del ciclo de carga y descarga presenta cambios menores a pesar de las diferencias en cp, sugiriendo que la eficiencia del PBTES depende más de las condiciones de diseño que de la variabilidad del cp del material de relleno.
The present work gives an analysis of the specific heat capacity (cp) behavior of copper slag samples, considering the variability of cp as a function of temperature and its impact on the performance of a packed bed thermal energy storage (PBTES) system. Probabilistic models based on the 5th, 50th, and 95th percentiles of cp data were developed to capture the most and least probable cases. The results show that the average cp value is slightly above the median, indicating a positive skew. Additionally, it is observed that the P5% model shows a rapid advancement of the thermocline in the storage tank, while the P95% model exhibits a slower propagation. The roundtrip efficiency shows minor changes in cp, suggesting that the efficiency of the PBTES depends more on the design conditions than on the variability of the cp of the filler material.
The present work gives an analysis of the specific heat capacity (cp) behavior of copper slag samples, considering the variability of cp as a function of temperature and its impact on the performance of a packed bed thermal energy storage (PBTES) system. Probabilistic models based on the 5th, 50th, and 95th percentiles of cp data were developed to capture the most and least probable cases. The results show that the average cp value is slightly above the median, indicating a positive skew. Additionally, it is observed that the P5% model shows a rapid advancement of the thermocline in the storage tank, while the P95% model exhibits a slower propagation. The roundtrip efficiency shows minor changes in cp, suggesting that the efficiency of the PBTES depends more on the design conditions than on the variability of the cp of the filler material.
Descripción
Organizado y patrocinado por: Federación iberoamericana de Ingeniería Mecánica y Universidad de Concepción - Chile. Departamento de Mecánica, FeIbIm – FeIbEM
Categorías UNESCO
Palabras clave
Almacenamiento térmico, Caracterización de materiales, Materiales heterogéneos, Análisis de Propiedades Termofísicas, Thermal Energy Storage, Material Characterization, Heterogeneous Materials, Thermophysical Properties Analysis
Citación
-
Centro
E.T.S. de Ingenieros Industriales
Departamento
Mecánica