Martín Fernández, SantiagoJensen, Jens OlufLi, QingfengGarcía Ybarra, Pedro LuisCastillo Gimeno, José Luis2024-11-122024-11-122019S. Martin, J.O. Jensen, Q. Li, P.L. Garcia-Ybarra, J.L. Castillo, Feasibility of ultra-low Pt loading electrodes for high temperature proton exchange membrane fuel cells based in phosphoric acid-doped membrane, International Journal of Hydrogen Energy, Volume 44, Issue 52, 2019, Pages 28273-28282, ISSN 0360-3199, https://doi.org/10.1016/j.ijhydene.2019.09.073.0360-3199 | eISSN 1879-3487https://doi.org/10.1016/j.ijhydene.2019.09.073https://hdl.handle.net/20.500.14468/24353The registered version of this article, first published in “International Journal of Hydrogen Energy, vol 44", is available online at the publisher's website: Elsevier, https://doi.org/10.1016/j.ijhydene.2019.09.073 La versión registrada de este artículo, publicado por primera vez en “International Journal of Hydrogen Energy, vol 44", está disponible en línea en el sitio web del editor: Elsevier, https://doi.org/10.1016/j.ijhydene.2019.09.073Factors as the Pt/C ratio of the catalyst, the binder content of the electrode and the catalyst deposition method were studied within the scope of ultra-low Pt loading electrodes for high temperature proton exchange membrane fuel cells (HT-PEMFCs). The Pt/C ratio of the catalyst allowed to tune the thickness of the catalytic layer and so to minimize the detrimental effect of the phosphoric acid flooding. A membrane electrode assembly (MEA) with 0.05 mgPtcm−2 at anode and 0.1 mgPtcm−2 at cathode (0.150 mgPtcm−2 in total) attained a peak power density of 346 mW cm−2. It was proven that including a binder in the catalytic layer of ultra-low Pt loading electrodes lowers its performance. Electrospraying-based MEAs with ultra-low Pt loaded electrodes (0.1 mgPtcm−2) rendered the best (peak power density of 400 mW cm−2) compared to conventional methods (spraying or ultrasonic spraying) but with the penalty of a low catalyst deposition rate.eninfo:eu-repo/semantics/openAccess12 Matemáticas::1299 Otras especialidades matemáticasFeasibility of ultra-low Pt loading electrodes for high temperature proton exchange membrane fuel cells based in phosphoric acid-doped membraneartículoUltra-low Pt loading;HT-PEMFC;PBI;Ultrasonic-spraying;Electrospraying